any idea of how to change brake pads on this type of car?How to change cs camry 1989 front brakes??front brake pads are the easiest to do. I simply jack it up put stands in place for safety. pull the wheels, install a 5/16's vacuum hose on the bleader nipple put the other end of the hose in a clear glass container with aprx 1/3 full of brake fluid in the bottom . then i open the bleader valve and gently compress the pad s toward the inside to free up the calipers from the rotors. I close the valve , remove the bolts holding the caliper to the support arms, remove the caliper and tie it up to keep it secured and not pulling on the flex line. the pads are held in by spring metal clips ans simply slip away from the rotor direction the face. now I use an old brake pad against the caliper piston and I use a clamp , open that bleeder valve again and cmpress the pistons till they are flush to the caliper housing. I examine the rotors for ridges but prefer to turn them for at least a clean up 10 thousand's. this insure smooth stopping. install the new pads with disc quiet applied to the backs of the pads where the dirt was not on the old pads and a little anti seaze where the pads set on the spring metal. reinstall the calipers and torque the bolts that hold the caliper on. top the fluid in the master and blead the brakes starting on the wheel furthest from the master (passenger side front) then the drivers front. if done right you have good smooth brakes. if wrong you have spoungy brakes.How to change cs camry 1989 front brakes??http://www.autozone.com/az/cds/en_us/090
try this
